Aktuelle News & Schlagzeilen

Arri SkyPanel capabilities expand with free firmware

SkyPanel Firmware 2.0 brings ten new features and several refinements:

Rosco/Lee Gel Libraries:

Already able to create a vast number of colors, the SkyPanel with Firmware 2.0 can now emulate a wide variety of lighting gels. The SkyPanel’s calibrated light engine reproduces color filters more accurately than a lighting console and enables users to select familiar gels via the on-board controls or through a new DMX protocol. SkyPanel gel libraries comprise Rosco and Lee filter categories that include color corrections, party colors, Rosco CalColor, Storaro Selection and many more.

Low End Mode:

Low End Mode enables SkyPanel to generate accurate CCTs with high color rendition and smooth dimming at low light levels. Finer control over the entire dimming range expands SkyPanels applications.

Tungsten Mode:

In the new Tungsten Mode, SkyPanel can mimic the dimming curve and strike on-and-off effect of a traditional tungsten lamp. The CCT warms as the light is dimmed and when the intensity drops to zero quickly there is a short afterglow of warm light. This mode is suitable for mixing the SkyPanel with tungsten sources or for producing a familiar effect.

DMX Fan Control:

The SkyPanel fans can now be set to different modes or turned off for short periods of time, directly via DMX. The SkyPanel will always protect itself from damage by turning the fans back on at a very low level if the LEDs get too hot.

Dimming Curves:

Firmware 2.0 increases the number of SkyPanel dimming curves from one to four, allowing different dimming behavior for specific applications. The exponential curve provides fine control at the low end of the dimming scale, while the logarithmic curve allows for better control at the high end. The ‘S’ curve gives both high and low end dimming fidelity, but limited control in the middle, and the linear curve gives a one-to-one translation of the output to intensity level.

Remote Device Management (RDM) Implementation:

RDM is now fully implemented in the SkyPanel. This two-way communication between the fixture and the console saves time by facilitating control of many SkyPanel functions from the ground, including DMX address and protocol, fan mode, temperature sensor readings, display settings, IP address and special modes.

Art-Net Implementation:

Lighting communication protocols and data infrastructures continue to evolve and change. Art-Net provides DMX-512A and RDM functionality over Ethernet network protocols. Art-Net is fully implemented in SkyPanel Firmware 2.0, allowing an expanded range of network devices to be used in building a complex lighting rig.

Save Error Logs to USB:

If an error occurs, SkyPanels are easy to diagnose and service with the automatically generated error log. This error log can now be exported to a USB stick, bypassing the need to connect the fixture to a computer.

Save/Load Presets via USB:

With the SkyPanel it is possible to store and recall up to ten different user presets, enabling the creation of a color palette for a particular production. It is now possible to save these presets to a USB stick and transfer them to another SkyPanel.

Save/Load Settings via USB:

SkyPanel Firmware 2.0 speeds up the process of configuring individual fixtures on large SkyPanel rigs by allowing all settings to be exported to a USB stick and transferred to another fixture. The DMX protocol, fan mode, dimming curve and many more settings can be loaded in a matter of seconds.

The update is available (free of charge) at www.arri.com/lightingsoftware.

www.arri.com

© 1999 - 2024 Entertainment Technology Press Limited News Stories