Aktuelle News & Schlagzeilen

Altinex debuts new under table 5X2 HDMI switcher

Altinex introduces the UT260-052 under table 5X2 HDMI switcher which is designed to be used with Altinex ShareTime collaborative display controllers that enable shared control of multiple inputs on a single monitor. The UT260-052 switcher has five HDMI video inputs that can be routed to two outputs. In addition to the five external inputs, there is a sixth internal media player input available to play MPEG files from a USB flash drive that can serve as a screensaver or for a company’s logo presentation.

Each of the five inputs is paired with an LED to indicate the presence of a signal. Input selection is supported through any of the following: Altinex ShareTime controllers, TCP/IP commands using a third-party controller, Altinex tabletop units with display select support, and automatic switching to the last input connected.

TV power (or power for a video display with support for CEC commands) and input selection on the UT260-052 is controlled through the use of CEC commands from the switcher. At power up or upon waking the system, the switcher turns on the TVs and then sets the TV inputs to those connected to the switcher outputs. No TV remote controls are necessary. The TVs must be CEC compatible and the CEC option must be enabled.

Additionally, the UT260-052 switcher can be used with the Altinex VP500-102 Digital Scaler. The UT260-052 switcher provides power for the scaler using a standard minimum 28AWG 3 ft. HDMI cable; no external scaler power is required. The scaler can be used to drive a constant resolution to a display - preventing annoying on screen messages such as loss of signal or input resolution changes.

www.altinex.com

© 1999 - 2024 Entertainment Technology Press Limited News Stories